** beyerdynamic– first to meet the new EIN standards for microphone RFI.
For more information please contact our sales office on 01444 258258
or link here for the press release.
SHM 800 Series APPLICATIONS
The 800 series of microphone systems which combine sensitivity and high directivity, are ideal for use on lecterns, conference and applications where the microphone will be placed at a distance from the Speaker.
FEATURES
• Hypercardioid/lobe polar pattern
• Elegant and aesthetically-pleasing appearance
• High rejection of ambient noise
• Pick up angle ± 40°
• Wide, linear frequency response optimised for speech
SPECIFICATIONS Transducer type Condenser
(back electret)
Operating principle Pressure gradient / interference tube
Polar pattern Hypercardioid/lobe
Frequency response 40 - 18,000 Hz
Open circuit voltage at 1 kHz 15 mV/Pa
Nominal impedance 200 ohm
Nominal load impedance 1 kohm
Max. SPL at 1 kHz 124 dB
Signal-to-noise ratio rel. to 1 Pa 60 dB
Wiring balanced with XLR-socket
Power supply 9 - 52 V, Phantom
Current consumption approx. 3 mA
With illuminated ring:
Supply voltage 5 - 24 V, depending on the drop resistance
Current consumption approx. 20 mA
Connection 3-pin male XLR - A-version
5-pin male XLR - version w/
illuminated ring
Dimensions:
Head diameter 8.2 / 12 mm /
length of head: 158 mm
Gooseneck diameter 8 mm
Shaft diameter bottom 20 mm ø
SHM803 A £233.71 SSP ex VAT
£274.60 SSP inc VAT
SHM803 AS £241.85 SSP ex VAT
£284.17 SSP inc VAT
SHM803 F £238.84 SSP ex VAT
£280.64 SSP inc VAT
SHM805 A £241.85 SSP ex VAT
£284.17 SSP inc VAT
SHM805 AS £249.99 SSP ex VAT
£293.74 SSP inc VAT
SHM805 F £247.16 SSP ex VAT
£290.41 SSP inc VAT
SHM 200 Series APPLICATIONS
The 200 series of goosenecks microphones are configured specifically for use within conference and meeting room applications. Different connection options make the microphones suitable for fixed or tabletop console stations.
FEATURES
• Cardioid polar pattern
• Elegant and aesthetically-pleasing appearance
• Good rejection of ambient noise
• Wide, linear frequency response optimised for speech
SPECIFICATIONS SHM 203-215
Transducer type Electret condenser
Operating principle Pressure gradient
Polar pattern Cardioid
Frequency response 50 - 19,000 Hz
Open circuit voltage 10 mV/Pa
Nominal impedance 200ohm
Load impedance 1 kohm
Max. SPL = 1 kHz, k 123 dB
Noise voltage 10 µVs
Signal to noise ratio related to 1 Pa 60 dB
Wiring balanced with XLR-socket
Supply voltage Phantom power 11 - 52 V
Current consumption approx. 3.5 mA
With illuminated ring
Supply voltage 5 - 24 V, depending on the drop resistance
Current consumption approx. 20 mA
Connection 3-pin XLR (male) - A-version
5-pin XLR with illuminated ring
Dimensions
Head diameter 13.5 mm
Gooseneck diameter 8 mm
Gooseneck diameter D-version 6 mm on top and 8 mm at the bottom
Shaft diameter at the bottom 20 mm
SHM 201 A £141.69 SSP ex VAT
£166.49 SSP inc VAT
SHM 203 A £166.94 SSP ex VAT
£196.15 SSP inc VAT
SHM 203 AS £175.05 SSP ex VAT
£205.70 SSP inc VAT
SHM 214 A £200.32 SSP ex VAT
£235.38 SSP inc VAT
SHM 215 A £208.23 SSP ex VAT
£244.67 SSP inc VAT
Accessories
ST 29376
ZSH 23 FT
ZSH 20
£64.95 SSP ex VAT
£110.57 SSP ex VAT
£42.86 SSP ex VAT
£76.32 SSP inc VAT
£129.92 SSP inc VAT
£50.36 SSP inc VAT
Terminations The long gooseneck microphones (400 or 500 mm) have a rigid upper part and lower flexible part for a better appearance.
We offer 3 standard types of termination:
G = flange mount fitting 5/8" internal thread supplied with 3/8" adapter with external preamplifier.
A = internal preamplifier terminated in a 3-pin male XLR plug
AS = internal preamplifier terminated in a 3-pin male XLR plug with on/off switch.
Both A and AS versions when ordered for the 21 or 81 illuminated ring versions come terminated with a 5-pin male XLR. This is required to supply a DC voltage for the LED.
