CK 930
APPLICATIONS
Designed for ENG/EFP applications, this mic has been specifically configured for use by news-gathering personnel and built to withstand the immediacy of news gathering. The extra-long handle gets the microphone out front during the frenzy of capturing the ultimate sound bite.
FEATURES
• Condenser microphone
• Internal shock mount for very low handling noise
• Rugged construction with Nextel® non-glare finish
• Weight-balanced, slim-profile design
• Set version includes: CK930 capsule, CV900 pre-amplifier, MVK930 cable
    		SPECIFICATIONS
    £291.26 SSP ex VAT
    Set Version     £683.24 SSP ex VAT
    		 £342.24 SSP inc VAT
    £802.81 SSP inc VAT
    MC 836/ MC 837
    APPLICATIONS
    Designed for use mounted on a boom pole, these shotgun microphones are ideal for capturing dialogue and audio from a distance; typically out of shot of a camera and within noisy environments. The outstanding directivity and smooth articulation make these microphones an ideal choice for studio and outside broadcast applications. The MC 836 and MC 837 have identical specifications but the MC 837 has a much longer interference tube and a very tight lobe response.
    FEATURES
    • Condenser microphone, lobe/cardioid polar pattern
    • Very wide frequency response
    • Low frequency roll-off switch
    • Rugged metal construction
    		 SPECIFICATIONS
    Condenser
    Operating principle pressure gradient line transducer technique
    Lobe/cardioid lobe
    Frequency response 40 - 20,000 Hz
    Supply voltage 11-52 V phantom supply
    Current consumption 4.3 mA
    Open circuit voltage 30 mV/Pa
    Nominal impedance 1180 ohm
    Load impedance 1000 ohm
    Max. SPL > 130 dB S
    Equivalent nominal SPL; approx. 13 dB
    Connection; 3-pin XLR mod. 2 = +, 3 = -,
    1 = ground
    Dimensions: diameter 21 mm
    length 248mm (MC836) & 516 mm (MC837)
    Weight 116g (MC836) & 218g (MC837)
    MC836 £657.44 SSP ex VAT
    MC837     £740.65 SSP ex VAT
    		 £772.49 SSP inc VAT
    £870.26 SSP inc VAT
    M 58
    APPLICATIONS
    Designed for ENG/EFP applications, this mic has been specifically configured for use by news-gathering personnel and built to withstand the immediacy of news gathering. The extra-long handle gets the microphone out front during the frenzy of capturing the ultimate sound bite.
    FEATURES
    • Dynamic microphone
    • Internal shock mount for very low handling noise
    • Rugged construction with Nextel® non-glare finish
    • Weight-balanced, slim-profile design
    		 SPECIFICATIONS
    Frequency response 40 - 20,000 Hz
    Omnidirectional
    Open circuit voltage 1.3 mV/Pa
    Nominal impedance 200 ohm
    Load impedance > 200 ohm
    £150.35 SSP ex VAT
    		 £176.66 SSP inc VAT
    MCE 58
    APPLICATIONS
    A battery operated microphone for use with semi-professional ENG recording equipment such as DAT and MD machines that do not have provision for supplying phantom power or accepting balanced inputs.
    FEATURES
    • Condenser microphone
    • Internal shock mount for very low handling noise
    • Rugged construction with Nextel® non-glare finish
    • Battery operation
    		 SPECIFICATIONS
    Frequency response 40 - 20,000 Hz
    Omnidirectional
    Open circuit voltage 4 mV/Pa
    Nominal impedance 370 ohm (unbalanced)
    Load impedance 2 kohm
    Max. SPL at 1 kHz 132 dB
    Power supply 12- 48 V
    £214.65 SSP ex VAT
    		 £252.21 SSP inc VAT
    M 59
    APPLICATIONS
    Specifically configured for ENG applications and reporters that require a solid fully-featured microphone for interview situations and sound-bite capture that can function under the most hostile of conditions.
    FEATURES
    • Dynamic microphone
    • Hypercardioid response
    • Non-glare Nextel® finish
    • Integral multi-stage windshield
    • Sophisticated shock mount system
    		 SPECIFICATIONS
    Frequency response 50 - 16,000 Hz
    Hypercardioid
    Rear attenuation at 1 kHz > 25 dB at 120°
    Open circuit voltage 3.0 mV/Pa
    Magnetic field suspension > 20 dB = 50 Hz
    Nominal impedance 200 ohm
    Load impedance > 1000 ohm
    Diaphragm Macrolon®
    £214.34 SSP ex VAT
    With switch     £227.21 SSP ex VAT
    		 £251.86 SSP inc VAT
    £266.97 SSP inc VAT
    MCE 494
    APPLICATIONS
    A cardioid condenser microphone intended for direct connection to notebooks, portable DAT and MD recorders.
    Its cardioid polar pattern and high gain before feedback make it ideal for location recordings.
    FEATURES
    • Cardioid condenser capsule
    • High gain before feedback
    • Direct powering
    • Excellent noise rejection
    • Small size and very light weight 6.5 g
    		 SPECIFICATIONS
    Condenser (back electret)
    Operating principle Pressure gradient
    Cardioid
    Frequency response 30 - 18,000 Hz
    Open circuit voltage approx. 20 mV/Pa
    Nominal impedance approx. 2 kohm
    Load impedance > 10 kohm
    Max. SPL 120 dB
    Signal-to-noise ratio 60 dB
    Connection mini stereo jack (3.5 mm)
    (L and R bridged)
    Dimensions Length: 45 mm /
    Diameter: 13.5 mm
    £44.79 SSP ex VAT
    		 £52.63 SSP inc VAT
    		MCE 86II
    MCE 86SII
    MCE 86SII CAM
    APPLICATIONS
    A highly directional professional shotgun microphone system for mounting on cameras or on a boom using optional mounts and suspension systems. They can also be table or desk mounted for broadcast interviewing when the microphone needs to be placed at a distance out of camera shot.
    FEATURES
    • Condenser microphone, hypercardioid/lobe response
    • Non-glare Nextel® finish
    • Rugged and lightweight
    • Operates from phantom power sources
    (8-48VDC)
    • MCE 86II phantom only inc. EA86 hotshoe mount
    • MCE 86SII w/ internal battery + phantom inc. EA19/25 + MKV11 mount
    • MCE 86SII CAM: video camera ready. Phantom battery version inc. EZ86 camera mount suspension, MKV86-K3 XLR to stereo jack cable and WS716 windscreen
    		 SPECIFICATIONS
    Type MCE 86.1/ .2 MCE86S.1/S.2
    Frequency response 5 - 18, kHz
    Open circuit voltage 4.2 mV/Pa
    Nominal impedance 190 ohm
    Load impedance 1000 ohm
    Max. SPL at 1 kHz 138 dB
    Signal-to-noise ratio: 61 dB
    A-weighted equivalent SPL 25 dB
    Noise voltage 3.8 µV
    Male connector 3-pin XLR
    Weight (w/out cable) 92 g 120 g
    Length 253 mm 310 mm
    MCE86II £230.83 SSP ex VAT
    MCE86SII     £301.59 SSP ex VAT
    MCE86 SII CAM     £310.10 SSP ex VAT
    		 £271.22 SSP inc VAT
    £354.37 SSP inc VAT
    £364.37 SSP inc VAT
    MCE 72
    APPLICATIONS
    A compact stereo microphone for X-Y stereo recording in ENG/EFP applications with broadcast or semi-professional equipment. Integral windshields and shock mount systems make the microphone particularly suitable for on-location recording.
    FEATURES
    • Condenser stereo microphone for X-Y recording
    • Capsule orientation: 90° (+/- 45° off the microphone axis)
    • Elastic transducer suspension system
    • Battery powered
    		 SPECIFICATIONS
    Frequency response 60 - 20,000 Hz
    Cardioid
    Open circuit voltage 10 mV/Pa
    Nominal impedance 180 ohm
    Load impedance > 1kohm
    Max. SPL at 1 kHz 125 dB
    Power supply 1.5V battery
    £208.34 SSP ex VAT
    		 £244.79 SSP inc VAT
    MCE 72 PV CAM £218.66 SSP ex VAT
    		 £256.93 SSP inc VAT
    MCE 82
    APPLICATIONS
    A microphone for X-Y stereo recording in ENG/EFP applications with broadcast or semi-professional equipment. Integral windshields and shock mount systems make the microphone particularly suitable for on-location recording.
    FEATURES
    • Condenser stereo microphone for X-Y-recording
    • Capsule orientation: 90° (+/- 45° off the microphone axis)
    • Elastic transducer suspension system
    • Battery or phantom powered
    		 SPECIFICATIONS
    Frequency response 50 - 20,000 Hz
    Cardioid
    Open circuit voltage 7.9 mV/Pa (= - 42 dBV)
    Nominal impedance 200 ohm
    Load impedance > 1000 ohm
    Max. SPL at 1 kHz 128 dB
    Power supply 12- 48 V
    £421.42 SSP ex VAT
    		 £495.17 SSP inc VAT