 |
|||||||||||
| ipCUE-alpha | ipCUE-beta | ipCUE-gamma | ipCUE-delta | ipCUE-epsilon | soundCUE | accessories | |||||||||||
|
|
|||||||||||
| ipCUE-alpha The ipCUE-alpha is a member of Ethernet IP enabled controller family. The control ports include bi-directional serial channels RS-232/422/485, serial outputs, infrared outputs up to 1.2 MHz, general I/O ports that can be configured as analog inputs or digital outputs and 24 volts relay outputs. The Ethernet port allows for bi-directional IP control of any manufacturer IP enabled products. The ipCUE-alpha is fully compatible with CUE‘s existing range of button panels and touch panels through and comes equipped with a CUEwire port. For convenience there has also been a +5 VDC output added to the design for powering external low-voltage equipment. The ipCUE-alpha is equipped with internal IR sensors. The sensors allow capture IR codes and receive IR codes from hand-held transmitters. Convenient for testing and troubleshooting this model also comes with front panel indicator LEDs that indicate the status of all the control ports. The ipCUE-alpha keeps date and time with its onboard real time clock (RTC) and thus allowing for a wide variety of distributed intelligence scheduling applications. The ipCUE-alpha comes complete with a web server and allows for setup, configuration, and testing through a standard web browser. This web-based interface allows for the graphical monitoring and control of all ports, which provides a truly time saving method for testing and troubleshooting. The ipCUE-alpha is fully compatible with WXL language which was designed as a support of a web interface for CUE system. The WXL is web compliant programming language for direct control of controller and touch panel control ports as well as for interaction between web control page and XPL application. The web control pages are stored in controller web storage section. Standard web development tools (e.g. HTML editors, Adobe® Flash®) can be used for control panel design. |
|||||||||||
| Features • Based on the Motorola ColdFire® processor • Ethernet IP enabled • Non-volatile flash memory for user application • Onboard real time clock • Fully compatible with current CUE communication buses • Standard control ports - bi-directional serial, IR/serial, general I/O and relay ports • Web server and Admin Web pages for setup and diagnostics • XPL Inside compatible with CUE programming tools • Front panel indicators for each control port • Unified enclosure design for desktop, rack, DIN rail and wall installation - no special models required • 19” rack installation available with accessories
|
|
||||||||||
|
|
|||||||||||
| ipCUE-beta The ipCUE-beta is a member of Ethernet IP enabled controller family. The control ports include bi-directional serial channels RS- 232, serial outputs and infrared outputs up to 1.2 MHz. The Ethernet port allows for bi-directional IP control of any manufacturer IP enabled products. The ipCUE-beta is fully compatible with CUE‘s existing range of button panels and touch panels through and comes equipped with a CUEwire port. For convenience there has also been a +5 VDC output added to the design for powering external low-voltage equipment. The ipCUE-beta is equipped with internal IR sensors. The sensors allow capture IR codes and receive IR codes from hand-held transmitters. Convenient for testing and troubleshooting this model also comes with front panel indicator LEDs that indicate the status of all the control ports. The ipCUE-beta keeps date and time with its onboard real time clock (RTC) and thus allowing for a wide variety of distributed intelligence scheduling applications. The ipCUE-beta comes complete with a web server and allows for setup, configuration, and testing through a standard web browser. This web-based interface allows for the graphical monitoring and control of all ports, which provides a truly time saving method for testing and troubleshooting. The ipCUE-beta is fully compatible with WXL language which was designed as a support of a web interface for CUE system. The WXL is web compliant programming language for direct control of controller and touch panel control ports as well as for interaction between web control page and XPL application. The web control pages are stored in controller web storage section. Standard web development tools (e.g. HTML editors, Adobe® Flash®) can be used for control panel design. |
|||||||||||
| Features • Based on the Motorola ColdFire® processor • Ethernet IP enabled • Non-volatile flash memory for user application • Onboard real time clock • Firmware upgradeable using Admin Web pages • Fully compatible with current CUE communication buses • Standard control ports - bi-directional serial and IR/serial • Web server and Admin Web pages for setup and diagnostics • XPL Inside compatible with CUE programming tools • Front panel indicators for each control port • Unified enclosure design for desktop, rack, DIN rail and wall installation - no special models required • 19” rack installation available with accessories
|
|
||||||||||
| back to top
|
|||||||||||
| ipCUE-gamma The ipCUE-gamma is a member of Ethernet IP enabled controller family. The control ports include bi-directional serial channels RS- 232 and RS-485 (CUEwire), serial outputs, infrared outputs up to 1.2 MHz, general I/O ports that can be configured as analog inputs or digital outputs and 24 volts relay outputs. The Ethernet port allows for bi-directional IP control of any manufacturer IP enabled products. The ipCUE-gamma is fully compatible with CUE‘s existing range of button panels and touch panels through and comes equipped with a CUEwire port. Convenient for testing and troubleshooting this model also comes with front panel indicator LEDs that indicate the status of all the control ports. The ipCUE-gamma keeps date and time with its onboard real time clock (RTC) and thus allowing for a wide variety of distributed intelligence scheduling applications. The ipCUE-gamma comes complete with a web server and allows for setup, configuration, and testing through a standard web browser. This web-based interface allows for the graphical monitoring and control of all ports, which provides a truly time saving method for testing and troubleshooting. The ipCUE-gamma is fully compatible with WXL language which was designed as a support of a web interface for CUE system. The WXL is web compliant programming language for direct control of controller and touch panel control ports as well as for interaction between web control page and XPL application. The web control pages are stored in controller web storage section. Standard web development tools (e.g. HTML editors, Adobe® Flash®) can be used for control panel design. |
|||||||||||
| Features • Based on the Motorola ColdFire® processor • Ethernet IP enabled • Non-volatile flash memory for user application • Onboard real time clock • Firmware upgradeable using Admin Web pages • Fully compatible with current CUE communication buses • Standard control ports - bi-directional serial, IR/serial, general I/O, and relay • Web server and Admin Web pages for setup and diagnostics • XPL Inside compatible with CUE programming tools • Front panel indicators for each control port • Unified enclosure designed for DIN rail installation
|
|
||||||||||
|
back to top |
|||||||||||
| ipCUE-delta The ipCUE-delta is a member of Ethernet IP enabled controller family. The control ports include bi-directional serial channels RS-232/422/485, serial outputs, infrared outputs up to 1.2 MHz, general I/O ports that can be configured as analog inputs or digital outputs and 24 volts relay outputs. The Ethernet port allows for bi-directional IP control of any manufacturer IP enabled products. The ipCUE-delta is fully compatible with CUE‘s existing range of button panels and touch panels through and comes equipped with a CUEwire port. For convenience there has also been a +5 VDC output added to the design for powering external low-voltage equipment. The ipCUE-delta is equipped with internal IR sensors. The sensors allow capture IR codes and receive IR codes from hand-held transmitters. Convenient for testing and troubleshooting this model also comes with front panel indicator LEDs that indicate the status of all the control ports. The ipCUE-delta keeps date and time with its onboard real time clock (RTC) and thus allowing for a wide variety of distributed intelligence scheduling applications. The ipCUE-delta comes complete with a web server and allows for setup, configuration, and testing through a standard web browser. This web-based interface allows for the graphical monitoring and control of all ports, which provides a truly time saving method for testing and troubleshooting. The ipCUE-delta is fully compatible with WXL language which was designed as a support of a web interface for CUE system. The WXL is web compliant programming language for direct control of controller and touch panel control ports as well as for interaction between web control page and XPL application. The web control pages are stored in controller web storage section. Standard web development tools (e.g. HTML editors, Adobe® Flash®) can be used for control panel design. |
|||||||||||
| Features • Based on the Motorola ColdFire® processor • Ethernet IP enabled • Non-volatile flash memory for user application • Onboard real time clock • Firmware upgradeable using Admin Web pages • Fully compatible with current CUE communication buses • Standard control ports - bi-directional serial, IR/serial, general I/O, analog and relay • Web server and Admin Web pages for setup and diagnostics • XPL Inside compatible with CUE programming tools • Unified enclosure design for desktop, rack, DIN rail and wall installation - no special models required • 19” rack installation available with accessories
|
|
||||||||||
| back to top
|
|||||||||||
| ipCUE-epsilon The ipCUE-epsilon is a new member of Ethernet IP enabled controller family. The control ports include bi-directional serial channels RS-232 and RS-485 (CUEwire), serial outputs, infrared outputs up to 1.2 MHz, general I/O ports that can be configured as analog inputs or digital outputs, analog outputs 0 – 10 V and 24 volts relay outputs. The Ethernet port allows for bi-directional IP control of any manufacturer IP enabled products. The ipCUE-epsilon is fully compatible with CUE‘s existing range of button panels and touch panels through and comes equipped with a CUEwire port. For convenience there has also been a +5 VDC output added to the design for powering external low-voltage equipment. The ipCUE-epsilon is equipped with internal IR sensors. The sensors allow capture IR codes and receive IR codes from hand-held transmitters. Convenient for testing and troubleshooting this model also comes with front panel indicator LEDs that indicate the status of all the control ports. The ipCUE-epsilon keeps date and time with its onboard real time clock (RTC) and thus allowing for a wide variety of distributed intelligence scheduling applications. The ipCUE-epsilon comes complete with a web server and allows for setup, configuration, and testing through a standard web browser. This web-based interface allows for the graphical monitoring and control of all ports, which provides a truly time saving method for testing and troubleshooting. The ipCUE-epsilon is fully compatible with WXL language which was designed as a support of a web interface for CUE system. The WXL is web compliant programming language for direct control of controller and touch panel control ports as well as for interaction between web control page and XPL application. The web control pages are stored in controller web storage section. Standard web development tools (e.g. HTML editors, Adobe® Flash®) can be used for control panel design. |
|||||||||||
| Features • Based on the Motorola ColdFire® processor • Ethernet IP enabled • Non-volatile flash memory for user application • Onboard real time clock • Firmware upgradeable using Admin Web pages • Fully compatible with current CUE communication buses • Standard control ports - bi-directional serial, IR/serial, general I/O, analog and relay • Web server and Admin Web pages for setup and diagnostics • XPL Inside compatible with CUE programming tools • Unified enclosure design for desktop, rack, DIN rail and wall installation - no special models required • 19” rack installation available with accessories
|
|
||||||||||
| back to top
|
|||||||||||
| soundCUE The soundCUE is a five-input / two-output audio matrix switcher capable of switching four stereo unbalanced line inputs and one mono microphone input to two independently switched outputs. Each matrix output is composed of two parallel stereo unbalanced line outputs. The soundCUE enables control of volume, bass and treble independently for each matrix output. The status of the soundCUE is indicated on the front panel. |
|||||||||||
| Features • Four stereo line inputs • Ono microphone input • Two independent stereo outputs • Fully compatible with ipCUE controllers • Front panel indicators for each output • 19” rack installation available with accessories
|
|
||||||||||
ipCUE-alpha Data Sheet