|
|
|
|
|
|
Paramus Contractor Line PCL Series Power Amplifiers PCL 1245 | PCL 1415 | PCL 1125T | PCL 1225T | PCL 1240T
The DYNACORD PCL-Series power amp line combines outstanding audio performance, exceptional reliability and secure operational safety in a compact 2RU chassis design.
All models in the PCL-Series provide several protection circuits which not only prevent the power amplifier itself but also the connected loudspeaker systems from being damaged. These protections include Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection and Thermal Overload Protection.
All PCL-Series power amps feature different hi-pass filters with switch selectable cut-off frequency to attenuate unwanted low-frequency signals. Infinitely variable low-noise high performance fans guarantee absolute thermal stability while keeping fan noise to a minimum. Direct “flow-thru” chassis design allows for a smooth flow of air from front-to-rear, which allows trouble-free operation even in smaller amp-racks.
Compact high density power supply units with low-leakage toroidal transformers provide extensive headroom far above the listed power rating. Premium phoenix style screw-lock connectors prevent accidental disconnection resulting in a more secure connection of audio signal and speaker cables.
All PCL-Series “T” version models are equipped with high performance output transformers also provide floating outputs for 50V, 70V and 100V installations. These models also provide voltage limiters to protect the loudspeaker outputs against overvoltage.
All Dynacord products are covered by a 3 year Warranty
|
|
|
|
|
 |
PCL 1415 |
| Load Impedance |
8 ohms |
4 ohms |
| Max. Midband Output Power: THD=0.1%, 1 Hz |
100 W |
160 W |
| Rated Output Power THD <0.1%, 20 Hz...20 kHz |
75 W |
150 W |
| Max. Single Channel Output Power- Dynamic Headroom |
120 W |
200 W |
| Max. Bridged Output Power THD=0.1%, 1 Hz |
315 W |
- |
| Max. RMS Voltage Swing THD=0.1% |
432.1 V |
|
Protection: |
Audio limiters, high temperature, peak current limiters, turn-on delay |
Features
• Maximum Bridge Power @ 8ohm 315W
• Frequency Response 10Hz-40kHz
• Phoenix style input connectors for easy installation
• Phoenix style connector block for all output modes
• Bridge mode operation
• Independent rear level controls for each channel
• Signal To Noise (A Weighted) 101dB
• Front-to-rear cooling |
Dimensions |
483 x 88 x 405 |
| Weight |
18 kg |
|
|
|
|
| PCL 1415 MANUALS & DATA SHEETS |
Data Sheet |
Brochure |
|
|
|
|
|
|
|
|
|
|
|
|
|