|
|
|
|
|
|
XA Systems
The system power amplifier, the XA 4000, is designed as a two-way power amplifier (SUB-TOP) and can be set up in a side-oriented configuration for short cable runs to the cabinets or mounted with similar devices in the rack.
Employing Class H technology, the 2U system power amplifiers boasts a state-of-the-art switching power supply and weighs a mere 8.25 kg. The output power is 1100 W in the SUB channel and 900 W in the TOP channel, in each case into 4 ohms, however up to three tops and/or three sub-woofers can be driven with extreme reliability and economy. All the necessary signal processing including equalization, LPN filter, lo-cut filter and an active crossover at 140 Hz with an 18 dB/octave slope in a modified Butterworth configuration is on board, as well as separate level controls on the front for the SUB and TOP to allow individual tailoring of the output to the venue or style of music.
The loudspeaker connection is provided by a 4-pin Speakon system socket with pins 1+/1- feeding the SUB and pins 2+/2- the TOP in addition to the 4-pin system wiring. Two additional output sockets with ‘standard’ wiring on pins 1+/1- permit full-range enclosures for side-fill or front-fill applications to be driven from the TOP-OUT as well as central bass speaker configurations.
All Dynacord products are covered by a 3 year Warranty
|
|

 |
XA 4000 2-channel Power Amplfiier |
| Load Impedance |
2 ohms |
4 ohms |
8 ohms |
| Max. Midband Output Power: THD=0.1%, 1 Hz |
1800 W |
1100 W |
600 W |
Rated Output Power
THD <0.1%, 20 Hz...20 kHz |
- |
1000 W |
500 W |
| Max. Single Channel Output Power- Dynamic Headroom |
1600 W |
900 W |
500 W |
| Max. Bridged Output Power THD=0.1%, 1 Hz |
- |
- |
- |
Max. RMS Voltage Swing
THD=0.1% |
78 V |
| Protections |
Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak current limiters, In-rush current limiters, Turn-on delay |
| Dimensions |
483 x 88.1 x 386.8 |
| Weight |
8.25 kg |
|
|
|
|
| XA 4000 MANUALS & DATA SHEETS |
Data Sheet |
Brochure |
|
|
 |
PM 2600 4-channel Power Amplfiier |
| Load Impedance |
|
4 ohms |
8 ohms |
| Max. Midband Output Power: THD=0.1%, 1 Hz |
- |
Rated Output Power
THD <0.1%, 20 Hz...20 kHz |
- |
350 W/ 8ohm |
700 W/ 4ohm |
| Max. Single Channel Output Power- Dynamic Headroom |
1600 W |
900 W |
500 W |
| Max. Bridged Output Power THD=0.1%, 1 Hz |
- |
- |
- |
Max. RMS Voltage Swing
THD=0.1% |
58.7 V |
| Protections |
Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak current limiters, In-rush current limiters, Turn-on delay |
| Dimensions |
483 x 177 x 426 |
| Weight |
30 kg |
|
|
|
|
| PM 2600 MANUALS & DATA SHEETS |
Data Sheet |
|
|
|
|